Koller Engineering products are tested to the latest European and International standards as required for vehicle products. All testing is carried out by independent test facilities.
Depending on the product, this involves either:
STATIC TESTING
ECE 14.04 and EEC Directive 76/115 as amended by 96/38/EEC or 2005/41/EEC, to M2 and M1 loads:
- M2 load: 13.5kN + (10 x seat mass)
- M1 load: 27kN + (20 x seat mass)
DYNAMIC TESTING
- ISO 10542 dynamic (crash) test, 20g at 48km/h
Koller Engineering rail clips are often tested in excess of ISO 10542 test. Components conforming to UN/ECE regulation No.16 are used in the manufacture of products.
Some products, such as rails, have been tested both statically and dynamically, as the majority of Koller Engineering products are designed to be used in rail.
If further testing is required, this can be arranged.